Acer bootet nicht mehr

[masterss]

Hallo,
nachdem gestern nun mein PC kaputt gegangen ist, wr heute mein Nootebook dran.
Gestern Abend Bilder von Kameras aufgespielt, dann Ruhezustand. Heute morgen angemacht, untensteherder Fehler kam, neugestartet ging.
ca. 9 Uhr: Nootebook angemacht, folgender Fehler:
Der Startscreen erscheint, danach ein schwarzer Schirm mit blinkendem Coursur danach:
PXE-EG1:Media test failure, check cable
PXE-M0F: Exiting Broadcom PXE ROM
Operating System not found

Wenn ich nun die Recovery CD einlege, läd er wohl irgendeinen Treiber, danach eine weiße Seite mit Courser.
Wenn ich ein Live System einlege kann ich auf beide (bzw. 3) Partitionen zugreifen, die Festplatte wird also erkannt. Auch im Bios ist sie drin.
Habe nun versucht meine "richtige" Windows Version zu instalieren, die Instalation klappt ohne Probleme. Bloß nach dem neustart, das gleiche Problem.

So langsam gehen mir die PC´s aus und ich habe noch eine Menge Arbeit.....

Weiß jemand einen Lösungsansatz?

Danke schonmal

[masterss]

So hier noch der SMART Bericht der Festplatte (falls das wem hilft)

Sollten nicht alle Festplatten angezeigt werden, verwenden Sie bitte das
Kommandozeilenwerkzeug 'smartctl' um den SMART-Status detailliert zu
ermitteln.

Sie finden diese Datei unter /tmp/smarttestshort-20090816-102435.log.

===========================================================
SMART-Status der Festplatte /dev/sda

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is smartmontools Home Page (last updated $Date: 2009-08-11 23:46:20 +0200 (Tue, 11 Aug 2009) $)
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K100 series
Device Model: HTS541010G9AT00
Serial Number: MP20QAX0GLWLDR
Firmware Version: MBZOA60A
User Capacity: 100.030.242.816 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Sun Aug 16 10:24:51 2009 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 18 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 18 occurred at disk power-on lifetime: 6418 hours (267 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 f6 3c 5e e0 Error: ICRC, ABRT at LBA = 0x005e3cf6 = 6175990
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 17 e0 3c 5e e0 00 00:01:57.400 READ DMA
c8 00 01 df 3c 5e e0 00 00:01:57.400 READ DMA
c8 00 07 e8 09 fe e5 00 00:01:57.400 READ DMA
c8 00 01 e7 09 fe e5 00 00:01:57.400 READ DMA
c8 00 07 60 08 fe e5 00 00:01:57.400 READ DMA
Error 17 occurred at disk power-on lifetime: 6418 hours (267 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 1e 3d 5e e0 Error: ICRC, ABRT at LBA = 0x005e3d1e = 6176030
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 3f e0 3c 5e e0 00 00:00:49.800 READ DMA
c8 00 01 df 3c 5e e0 00 00:00:49.800 READ DMA
c8 00 07 e8 09 fe e5 00 00:00:49.800 READ DMA
c8 00 01 e7 09 fe e5 00 00:00:49.800 READ DMA
c8 00 07 60 08 fe e5 00 00:00:49.800 READ DMA
Error 16 occurred at disk power-on lifetime: 6418 hours (267 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 07 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000007 = 7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 00 00:00:49.000 READ DMA
27 00 00 00 00 00 e0 00 00:00:48.900 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:00:48.900 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:00:48.800 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:48.800 READ NATIVE MAX ADDRESS EXT
Error 15 occurred at disk power-on lifetime: 6418 hours (267 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 07 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000007 = 7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 00 e0 00 00:00:48.000 READ DMA
27 00 00 00 00 00 e0 00 00:00:47.900 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:00:47.900 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 00:00:47.900 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:00:47.900 READ NATIVE MAX ADDRESS EXT
Error 14 occurred at disk power-on lifetime: 6418 hours (267 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 ff 01 00 00 00 e0 00 00:00:08.300 READ DMA
c8 ff 01 00 00 00 e0 00 00:00:08.300 READ DMA
c8 ff 01 00 00 00 e0 00 00:00:08.300 READ DMA
c8 ff 01 00 00 00 e0 00 00:00:08.200 READ DMA
f5 ff 5a 05 00 00 e0 00 00:00:07.800 SECURITY FREEZE LOCK
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Es handelt sich übrigends um ein Acer Aspire 1694 WLMI ( Bluethoot Version)

MfG