[Windows XP-64 bit] Laptop mit Wurm Win32/Bagle.gen.zip befallen

[AHT]

Einmal das tun:

• Von hier GSmartControl herunterladen und installieren: BerliOS Download - The Open Source Mediator
• GSmartControl starten
• Im Programm doppelt auf die Festplatte(n) klicken
• Registrierkarte Attributes aufrufen
• Mit Save As die Logs der Festplatte(n) abspeichern
• Log-Datei(n) bei File-Upload.net - Ihr kostenloser File Hoster! hochladen und Downloadlinks hier posten.
• Das mit allen Festplatten tun, die das Programm anzeigt.

[Guel]

smartctl 5.41 2011-06-09 r3365 [i686-w64-mingw32-xp-sp2] (sf-win32-5.41-1)
Copyright (C) 2002-11 by Bruce Allen, smartmontools

=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK6037GSX
Serial Number: 17TVT872T
Firmware Version: DL330M
User Capacity: 60.011.642.880 bytes [60,0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Jan 27 18:15:01 2012 GTBN
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 40) minutes.
SCT capabilities: (0x0001) SCT Status supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1120
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1656
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 16
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 038 038 000 Old_age Always - 25100
10 Spin_Retry_Count 0x0033 133 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1629
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 571
193 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 179078
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 32 (Min/Max 9/59)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 11
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 116
222 Loaded_Hours 0x0032 041 041 000 Old_age Always - 23633
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 298
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0

SMART Error Log Version: 1
ATA Error Count: 6461 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 6461 occurred at disk power-on lifetime: 22908 hours (954 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 cd 9e 4b e0 Error: UNC 3 sectors at LBA = 0x004b9ecd = 4955853

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c8 9e 4b e0 00 3d+02:18:00.120 READ DMA
c8 00 01 00 00 00 e0 00 3d+02:18:00.097 READ DMA
ca 00 08 e0 93 91 e3 00 3d+02:18:00.097 WRITE DMA
ca 00 08 40 71 8f e3 00 3d+02:18:00.097 WRITE DMA
ca 00 08 b0 65 8f e3 00 3d+02:18:00.097 WRITE DMA

Error 6460 occurred at disk power-on lifetime: 22908 hours (954 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 cd 9e 4b e0 Error: UNC 3 sectors at LBA = 0x004b9ecd = 4955853

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c8 9e 4b e0 00 3d+02:17:56.347 READ DMA
ca 00 80 60 0f b9 e2 00 3d+02:17:56.344 WRITE DMA
ca 00 80 98 0d b9 e2 00 3d+02:17:56.343 WRITE DMA
ca 00 80 90 0c b9 e2 00 3d+02:17:56.342 WRITE DMA
ca 00 08 00 ce 24 e1 00 3d+02:17:56.341 WRITE DMA

Error 6459 occurred at disk power-on lifetime: 22908 hours (954 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 cd 9e 4b e0 Error: UNC 3 sectors at LBA = 0x004b9ecd = 4955853

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 18 b8 9e 4b e0 00 3d+02:17:52.702 READ DMA
c8 00 51 00 aa 17 e0 00 3d+02:17:52.646 READ DMA
c8 00 08 f8 a9 17 e0 00 3d+02:17:52.638 READ DMA
c8 00 08 30 00 61 e0 00 3d+02:17:52.637 READ DMA
c8 00 37 78 e6 1b e0 00 3d+02:17:52.620 READ DMA

Error 6458 occurred at disk power-on lifetime: 22908 hours (954 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 cd 9e 4b e0 Error: UNC 3 sectors at LBA = 0x004b9ecd = 4955853

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c8 9e 4b e0 00 3d+02:17:38.153 READ DMA
c8 00 01 00 00 00 e0 00 3d+02:17:38.131 READ DMA
c8 00 08 b0 37 9f e3 00 3d+02:17:38.112 READ DMA
ca 00 08 e0 93 91 e3 00 3d+02:17:38.112 WRITE DMA
ca 00 80 a0 73 b8 e2 00 3d+02:17:38.111 WRITE DMA

Error 6457 occurred at disk power-on lifetime: 22908 hours (954 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 cd 9e 4b e0 Error: UNC 3 sectors at LBA = 0x004b9ecd = 4955853

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c8 9e 4b e0 00 3d+02:17:34.420 READ DMA
ca 00 08 e8 1c a6 e3 00 3d+02:17:34.420 WRITE DMA
c8 00 10 c0 37 9f e3 00 3d+02:17:34.400 READ DMA
ca 00 08 b8 72 8f e3 00 3d+02:17:34.399 WRITE DMA
c8 00 18 b8 9e 4b e0 00 3d+02:17:30.439 READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Es gab nur die Möglichkeit, den test mit dem Laptop zu machen. Andere Festplatten wurden mir nicht angezeigt.
LG Gül

[AHT]

Schlechte Nachrichten: Festplatte hat Fehler (Oberflächenproblem), deswegen hakt der Scanner auch und Combofix stürzt ab.
Da muss eine neue Platte rein, wie es aussieht.

5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 16
 
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 11

197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 2

[AHT]

Wenn neue Platte drin ist, Rechner neu aufsetzen.
Alle auf dem Rechner verwendeten Passwörter dann andern (EMAIL, EBAY,...).

[Guel]

Ähhh..was für ne neue Platte??? Neue Festplatte? Neues Motherboard?? Ist das noch rentabebel???
LG Gül

[AHT]

Neue Festplatte muss rein. Dürfte eine SATA Festplatte sein.

[Guel]

Ohje Das sind ja keine guten Nachrichten.....Lieben Dank für die Hilfe
LG Gül