Notebook startet nicht mehr ganz

[mvm]

Hallo

Ich habe ein Notebook mit Win Vista 32-Bit.
Ich habe meine Festplatte auf zwei paritionen
Aufgeteilt und auf beiden ist Win Vista .
Jetzt mein Problem
Wenn ich es starte dauert es ca 15 min bis das runde
Windows Logo kommt dann nach 4 min schwarzer Bildschirm und
Es passiert nichts mehr. Es ist egal welches Vista ich starte
Bei beiden das gleiche.
Könnte das ein Hardware defekt sein?

[AHT]

Ja, RAM oder Festplatte kann das sein.

Von hier die ZIP von Memtest herunterladen: http://www.memtest86.com/memtest86-3.5.iso.zip

Von hier IMGBurn herunterladen und installieren:
ImgBurn - Download - CHIP Online

Die memtest86-3.5.iso.zip einmal entpacken, es entsteht dann eine Datei mit dem Namen memtest86-3.5.iso.

IMGBurn öffnen und auf Write image file to disk klicken.
Bei Pleace select a file... auf das kleine Ordnersymbol rechts neben dem Schriftzug klicken und die memtest86-3.5.iso auswählen.
Beschreibbare CD einlegen und ganz unten im Programm auf das CD-Symbol klicken.

Es entsteht dann eine CD, mit der du den Rechner booten kannst. Es wird nach dem Reboot sofort ein Speichertest durchgeführt. Den durchlaufen lassen, bis ein Fehler gefunden wurde, der Test sich beendet hat oder mindestens bis PASS 5 durchgelaufen ist (danach kannst du abbrechen).
Ergebnisse hier melden.

Den Vista Speichertest bitte nicht ausführen, der könnte nicht mehr korrekt funktionueren.

[mvm]

Hallo

Danke für die Antwort. Kann man das Programm auch vom USB Stick aus starten? Habe nämlich zurzeit keinen brennen. Die iso kann ich auch jedenfall mit DAEMON Tools Lite öffnen.

[AHT]

Wird schwer werden - habe das bislang noch nicht gemacht.
Kannst du irgendwo anders brennen? Du brauchst noch weitere CDs...

[mvm]

Hallo

Habe gerade eine USB version gefunden Memtest86+ Download - ComputerBase der test läuft Aktuell das Ergebniss werde ich dann hier Posten

[mvm]

Habe jetzt alle 8 Test`s durchlauf lassen. Es ist kein fehler aufgetreten.
Was kann ich jetzt noch machen?

mfg

mvm

[AHT]

Sehr schön, hätte mich auch gewundert.

Festplatte muss mit SMART gestestet werden. Ich brauche die SMART Daten.
Hier eine CD: Downloads

Desweiteren benötigst du folgende CD:
Vista-Recovery-CDs zum kostenlosen Download - Windows-News

[AHT]

Das hier hilft vielleicht, die Sachen auf einen USB Stick zu bringen: UNetbootin - Homepage and Downloads

[AHT]

• USB Stick formatieren.
• Von hier Parted Magic Live CD herunterladen: https://sourceforge.net/projects/par...7.iso/download
• UNetbootin - Homepage and Downloads herunterladen und ausführen.
• Parted Magic pmagic-5.7.iso mit Unetbootin auf USB Stick brennen.
• Von USB Stick booten.
• GSMartControl starten.
• Festplatte(n) doppelt anklicken.
• Attributes anklicken.
• Daten mit Save As in Datei speichern und hier im Forum die Daten einfügen.

[mvm]

smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, smartmontools

=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.3 series
Device Model: ST9160821AS
Serial Number: 5MA57E19
Firmware Version: 3.ALC
User Capacity: 160.041.885.696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Nov 20 00:41:03 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SCT capabilities: (0x0001) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3167
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 232661778
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2780
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3150
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 094 094 000 Old_age Always - 6
190 Airflow_Temperature_Cel 0x0022 061 048 045 Old_age Always - 39 (Lifetime Min/Max 38/43)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1403
193 Load_Cycle_Count 0x0032 071 071 000 Old_age Always - 58060
194 Temperature_Celsius 0x0022 039 052 000 Old_age Always - 39 (0 9 0 0)
195 Hardware_ECC_Recovered 0x001a 077 063 000 Old_age Always - 222703058
197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967295
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967295
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 489
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0

SMART Error Log Version: 1
ATA Error Count: 275 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 275 occurred at disk power-on lifetime: 1544 hours (64 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 fe 12 00 00 40 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 01 10 00 00 40 00 00:26:39.656 READ LOG EXT
60 08 08 00 00 00 00 00 00:26:39.646 READ FPDMA QUEUED
60 08 08 00 00 00 00 00 00:26:39.635 READ FPDMA QUEUED
60 08 08 00 00 00 00 00 00:26:39.604 READ FPDMA QUEUED
60 08 08 00 00 00 00 00 00:26:39.595 READ FPDMA QUEUED

Error 274 occurred at disk power-on lifetime: 1538 hours (64 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 fe 12 00 00 40 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 01 10 00 00 40 00 01:53:45.674 READ LOG EXT
60 08 08 00 00 00 00 00 01:53:45.672 READ FPDMA QUEUED
60 80 80 00 00 00 00 00 01:53:45.670 READ FPDMA QUEUED
60 80 80 00 00 00 00 ff 01:53:45.669 READ FPDMA QUEUED
60 80 80 00 00 00 00 00 01:53:45.667 READ FPDMA QUEUED

Error 273 occurred at disk power-on lifetime: 1538 hours (64 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 fe 12 00 00 40 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 01 10 00 00 40 00 01:51:49.994 READ LOG EXT
60 08 08 00 00 00 00 00 01:51:49.986 READ FPDMA QUEUED
60 78 78 00 00 00 00 00 01:51:49.986 READ FPDMA QUEUED
60 00 00 00 00 00 00 00 01:51:49.983 READ FPDMA QUEUED
60 00 00 00 00 00 00 00 01:51:49.980 READ FPDMA QUEUED

Error 272 occurred at disk power-on lifetime: 1538 hours (64 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 fe 12 00 00 40 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 01 10 00 00 40 00 01:51:49.994 READ LOG EXT
60 08 08 00 00 00 00 00 01:51:49.986 READ FPDMA QUEUED
60 78 78 00 00 00 00 00 01:51:49.986 READ FPDMA QUEUED
60 00 00 00 00 00 00 00 01:51:49.983 READ FPDMA QUEUED
60 00 00 00 00 00 00 00 01:51:49.980 READ FPDMA QUEUED

Error 271 occurred at disk power-on lifetime: 1538 hours (64 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 fe 12 00 00 40 Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 01 10 00 00 40 00 01:51:49.994 READ LOG EXT
60 08 08 00 00 00 00 00 01:51:49.986 READ FPDMA QUEUED
60 78 78 00 00 00 00 00 01:51:49.986 READ FPDMA QUEUED
60 00 00 00 00 00 00 00 01:51:49.983 READ FPDMA QUEUED
60 00 00 00 00 00 00 00 01:51:49.980 READ FPDMA QUEUED

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[AHT]

Festplatte defekt.

[mvm]

Oh je.

Und wo kann man das da raus lesen? Ist das einfach oder braucht man da für viel wissen?

[AHT]

Sorry, gestern keine Zeit mehr....

Nur das wichtigste:

7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 232661778

Die Platte hat starke Probleme, den Kopf zu positionieren: 232661778 Fehler passiert.

198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967295

4294967295 mal hast du Daten verloren, die nicht wieder hergestellt werden konnten.

Fazit: Motor von Platte schrott.
Ob man dafür viel wissen braucht, weiß ich nich - meins reicht auf jeden Fall aus.

[mvm]

Danke für deine Hilfe. Dann werde ich mir wohl mal eine neue kaufen.

MfG

[mvm]

Hallo ich habe da mal eine andere Festplatte. Hier die log Datei
Vielleicht kann mir jemand sagen was der Platte fehlt danke
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, smartmontools

=== START OF INFORMATION SECTION ===
Model Family: ****IBM Deskstar 40GV & 75GXP series (all other firmware)
Device Model: ****IBM-DTLA-307030
Serial Number: ***YKEYKTVN011
Firmware Version: TX4OA60A
User Capacity: ***30,738,677,760 bytes
Device is: *******In smartctl database [for details use: -P show]
ATA Version is: **5
ATA Standard is: *ATA/ATAPI-5 T13 1321D revision 1
Local Time is: ***Thu Sep 15 17:37:30 2011 UTC

==> WARNING: IBM Deskstar 40GV and 75GXP drives may need upgraded SMART firmware.
Please see http://www.geocities.com/dtla_update/ and
Lenovo Support - Home (US)

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: *(0x00) * *Offline data collection activity
* * * * * * * * * *was never started.
* * * * * * * * * *Auto Offline Data Collection: Disabled.
Self-test execution status: *****( **0) * *The previous self-test routine completed
* * * * * * * * * *without error or no self-test has ever
* * * * * * * * * *been run.
Total time to complete Offline
data collection: * * * * (1762) seconds.
Offline data collection
capabilities: * * * * * * (0x1b) SMART execute Offline immediate.
* * * * * * * * * *Auto Offline data collection on/off support.
* * * * * * * * * *Suspend Offline collection upon new
* * * * * * * * * *command.
* * * * * * * * * *Offline surface scan supported.
* * * * * * * * * *Self-test supported.
* * * * * * * * * *No Conveyance Self-test supported.
* * * * * * * * * *No Selective Self-test supported.
SMART capabilities: ***********(0x0003) * *Saves SMART data before entering
* * * * * * * * * *power-saving mode.
* * * * * * * * * *Supports SMART auto save timer.
Error logging capability: *******(0x01) * *Error logging supported.
* * * * * * * * * *No General Purpose Logging support.
Short self-test routine
recommended polling time: * * ( **2) minutes.
Extended self-test routine
recommended polling time: * * ( *19) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME *********FLAG ****VALUE WORST THRESH TYPE *****UPDATED *WHEN_FAILED RAW_VALUE
*1 Raw_Read_Error_Rate ****0x000b **078 **078 **060 ***Pre-fail *Always ******- ******19202677
*2 Throughput_Performance *0x0005 **100 **100 **050 ***Pre-fail *Offline *****- ******0
*3 Spin_Up_Time ***********0x0007 **100 **100 **024 ***Pre-fail *Always ******- ******215 (Average 223)
*4 Start_Stop_Count *******0x0012 **099 **099 **000 ***Old_age **Always ******- ******4797
*5 Reallocated_Sector_Ct **0x0033 **100 **100 **005 ***Pre-fail *Always ******- ******128
*7 Seek_Error_Rate ********0x000b **100 **100 **067 ***Pre-fail *Always ******- ******0
*8 Seek_Time_Performance **0x0005 **100 **100 **020 ***Pre-fail *Offline *****- ******0
*9 Power_On_Hours *********0x0012 **098 **098 **000 ***Old_age **Always ******- ******16283
10 Spin_Retry_Count *******0x0013 **100 **100 **060 ***Pre-fail *Always ******- ******0
12 Power_Cycle_Count ******0x0032 **099 **099 **000 ***Old_age **Always ******- ******4734
192 Power-Off_Retract_Count 0x0032 **097 **097 **050 ***Old_age **Always ******- ******4797
193 Load_Cycle_Count *******0x0012 **097 **097 **050 ***Old_age **Always ******- ******4797
194 Temperature_Celsius ****0x0002 **137 **137 **000 ***Old_age **Always ******- ******40
196 Reallocated_Event_Count 0x0032 **094 **094 **000 ***Old_age **Always ******- ******268
197 Current_Pending_Sector *0x0022 **100 **100 **000 ***Old_age **Always ******- ******58
198 Offline_Uncorrectable **0x0008 **100 **100 **000 ***Old_age **Offline *****- ******0
199 UDMA_CRC_Error_Count ***0x000a **200 **200 **000 ***Old_age **Always ******- ******0

SMART Error Log Version: 1
ATA Error Count: 2980 (device log contains only the most recent five errors)
* *CR = Command Register [HEX]
* *FR = Features Register [HEX]
* *SC = Sector Count Register [HEX]
* *SN = Sector Number Register [HEX]
* *CL = Cylinder Low Register [HEX]
* *CH = Cylinder High Register [HEX]
* *DH = Device/Head Register [HEX]
* *DC = Device Command Register [HEX]
* *ER = Error register [HEX]
* *ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2980 occurred at disk power-on lifetime: 16282 hours (678 days + 10 hours)
*When the command that caused the error occurred, the device was active or idle.

*After command completion occurred, registers were:
*ER ST SC SN CL CH DH
*-- -- -- -- -- -- --
*40 59 08 0f 44 60 e0 *Error: UNC at LBA = 0x0060440f = 6308879

*Commands leading to the command that caused the error were:
*CR FR SC SN CL CH DH DC **Powered_Up_Time *Command/Feature_Name
*-- -- -- -- -- -- -- -- *---------------- *--------------------
*20 00 08 0f 44 60 e0 00 *****01:00:11.700 *READ SECTOR(S)
*20 00 10 57 c8 f8 e0 00 *****01:00:11.700 *READ SECTOR(S)
*20 00 08 47 74 5f e1 00 *****01:00:11.700 *READ SECTOR(S)
*20 00 10 bf 81 1f e1 00 *****01:00:11.700 *READ SECTOR(S)
*20 00 08 df 56 60 e1 00 *****01:00:11.700 *READ SECTOR(S)

Error 2979 occurred at disk power-on lifetime: 16282 hours (678 days + 10 hours)
*When the command that caused the error occurred, the device was active or idle.

*After command completion occurred, registers were:
*ER ST SC SN CL CH DH
*-- -- -- -- -- -- --
*40 59 08 d7 49 57 e0 *Error: UNC at LBA = 0x005749d7 = 5720535

*Commands leading to the command that caused the error were:
*CR FR SC SN CL CH DH DC **Powered_Up_Time *Command/Feature_Name
*-- -- -- -- -- -- -- -- *---------------- *--------------------
*20 00 08 d7 49 57 e0 00 *****01:00:00.600 *READ SECTOR(S)
*20 00 2b ef ee 01 e2 00 *****01:00:00.600 *READ SECTOR(S)
*20 00 08 9f 40 60 e0 00 *****01:00:00.600 *READ SECTOR(S)
*20 00 0e b7 fa ff e1 00 *****01:00:00.600 *READ SECTOR(S)
*20 00 08 7f fb f5 e1 00 *****01:00:00.600 *READ SECTOR(S)

Error 2978 occurred at disk power-on lifetime: 16282 hours (678 days + 10 hours)
*When the command that caused the error occurred, the device was active or idle.

*After command completion occurred, registers were:
*ER ST SC SN CL CH DH
*-- -- -- -- -- -- --
*40 59 08 97 4f 60 e0 *Error: UNC at LBA = 0x00604f97 = 6311831

*Commands leading to the command that caused the error were:
*CR FR SC SN CL CH DH DC **Powered_Up_Time *Command/Feature_Name
*-- -- -- -- -- -- -- -- *---------------- *--------------------
*c4 00 08 97 4f 60 e0 00 *****00:59:27.800 *READ MULTIPLE
*c4 00 08 5f 09 08 e2 00 *****00:59:27.700 *READ MULTIPLE
*c4 00 08 6f 09 08 e2 00 *****00:59:27.700 *READ MULTIPLE
*c4 00 08 87 fd 07 e2 00 *****00:59:27.700 *READ MULTIPLE
*c4 00 08 8f f0 07 e2 00 *****00:59:27.700 *READ MULTIPLE

Error 2977 occurred at disk power-on lifetime: 16282 hours (678 days + 10 hours)
*When the command that caused the error occurred, the device was active or idle.

*After command completion occurred, registers were:
*ER ST SC SN CL CH DH
*-- -- -- -- -- -- --
*40 59 30 6e 1d 69 e0 *Error: UNC at LBA = 0x00691d6e = 6888814

*Commands leading to the command that caused the error were:
*CR FR SC SN CL CH DH DC **Powered_Up_Time *Command/Feature_Name
*-- -- -- -- -- -- -- -- *---------------- *--------------------
*c4 00 80 1f 1d 69 e0 00 *****00:51:04.600 *READ MULTIPLE
*e7 00 00 00 00 00 a0 00 *****00:51:04.600 *FLUSH CACHE
*c5 00 08 47 00 5e e0 00 *****00:51:04.500 *WRITE MULTIPLE
*c5 00 08 27 fc f5 e1 00 *****00:51:04.500 *WRITE MULTIPLE
*c5 00 08 3f 00 5e e0 00 *****00:51:04.500 *WRITE MULTIPLE

Error 2976 occurred at disk power-on lifetime: 16282 hours (678 days + 10 hours)
*When the command that caused the error occurred, the device was active or idle.

*After command completion occurred, registers were:
*ER ST SC SN CL CH DH
*-- -- -- -- -- -- --
*40 59 08 d7 49 57 e0 *Error: UNC at LBA = 0x005749d7 = 5720535

*Commands leading to the command that caused the error were:
*CR FR SC SN CL CH DH DC **Powered_Up_Time *Command/Feature_Name
*-- -- -- -- -- -- -- -- *---------------- *--------------------
*20 00 08 d7 49 57 e0 00 *****00:44:28.700 *READ SECTOR(S)
*30 00 08 17 11 f5 e1 00 *****00:44:28.700 *WRITE SECTOR(S)
*e7 00 00 00 00 00 a0 00 *****00:44:28.700 *FLUSH CACHE
*20 00 08 ff 0e 60 e0 00 *****00:44:28.700 *READ SECTOR(S)
*e7 00 00 00 00 00 a0 00 *****00:44:28.600 *FLUSH CACHE

SMART Self-test log structure revision number 1
Num *Test_Description ***Status *****************Remaining *LifeTime(hours) *LBA_of_first_error
# 1 *Short offline ******Completed without error ******00% ****16283 ********-

Device does not support Selective Self Tests/Logging